Overview of 450mm Vibrating Filter Sieve for Paint Coating:
What is the 450 filter sieve? The noiseless high-performance 450mm vibrating filter sieve for paint coating, also known as the noiseless high performance vibro separator and filter, is well-qualified for filtering of glaze, paint, soya bean milk or similar materials. The noiseless high performance vibro separator and filter is highly recognized due to its low profile design and mobility. Much quieter but still highly efficient compared to other separators with the similar size. The design is highly popular among small and medium businesses.
Our 450 vibrating filter sieve is a small commercial separator available. It does not require to be bolted down. Available with the rotary bush system. Ideal for small scale separation or pre-production testing.
It is a kind of small vibrating screen filter which is easy to move, high efficiency, low noise and small volume. It is especially suitable for powder screening and slurry filtration with less impurity content. The 325 mesh screen filter paint with a specific gravity of 1.1 can reach 1200 liters per hour, and the 30 mesh screen can handle 700 kilograms per hour flour. It has an excellent filtration performance for ceramic uranium material.
Technical Parameters of 450mm Vibrating Filter Sieve for Paint Coating:
| Effective Screen Diameter | 380 mm |
| Material | stainless steel 304 or carbon steel |
| Layer of Screen | only one layer |
| Motor | one unit of vertical vibration motor |
| Vibration Amplitude | 2~5 mm |
| Power | 0.18 KW |
| Voltage | 220V/Single-phase, 380V or 415V/3-Phase, 50/60 HZ |
| Frequency | 1480 r/min |
| Mesh Size | 0.038 mm~3 mm |
| Machine Size | 460*550*665 mm |
| Application | food, pharmaceutical, chemical, paint and ceramics etc. |
Working Principle of 450mm Vibrating Filter Sieve for Paint Coating:
The 450 type filter screen adopts a new type of vertical vibration motor as the vibration source. The upper and lower ends of the vertical vibration motor are equipped with eccentric weights, which can generate horizontal, vertical and inclined three-dimensional motion. The exciting force is transmitted to the screen frame and materials through the receiving pan to achieve an excellent grade. By adjusting the phase angle of the upper and lower eccentric weight hammer, the movement track of the material on the screen surface can be changed to ensure the full grading of the material.
Features of 450mm Vibrating Filter Sieve for Paint Coating:
1. Low profile: it does not create dust clouds, no blockage.
2. Highly efficient and versatile : it can be used for wet and/or dry separation, up to 400 mesh.
3. Compact: small and light weight, can be moved with ease and requires little space.
4. Controlled vibration : minimal wear and tear, minimal maintenance, and noiseless.
5. Fast frame change : the clip design allows instant frame change.
6. Stainless steel for contact parts : this sieve machine is made of stainless steel SS304 for contact parts, including the screen frame and vibrating body. Full stainless steel 304 or S316L are available on request.
Advantages of 450mm Vibrating Filter Sieve for Paint Coating:
1. High screening accuracy and high efficiency, can be used in any powder, granule or mucus.
2. Fully enclosed structure, the powder is not flying, the mesh is not blocked, and sieving powder can reach 400 mesh.
3. Small volume, low noise, easy to move, the discharge port can be arranged along the circumferential direction.
4. The machine is equipped with mesh anti-blocking device, which can effectively eliminate the blockage of the mesh.
5. There are no special requirements for the equipment foundation, and the general cement floor can be used directly.
6. It is easy to replace the screen, easy to operate and easy to clean.
7. The mixed materials enter from the center. After sieving, the materials of various particle sizes are automatically and continuously discharged from the respective outlets, which can realize continuous production.
Structural Composition of 450mm Vibrating Filter Sieve for Paint Coating:
The 450 type filter sieve machine consists of the body, vibrating motor, hopper, screen frame, electronic control unit etc. The machine adopts a new type of vibration structure with stable vibration and high efficiency. The screen frame is easy to operate, easy to clean, and easy to replace the screen. This machine has the advantages of novel appearance, reasonable structure and easy to operate, and is more suitable for occasions where the working place is frequently changed.
Screen Replacement of 450mm Vibrating Filter Sieve for Paint Coating:
1. First remove the screen frame from the receiving pan, loosen the bolts, remove the screen that needs to be replaced.
2. Then spread the new screen on the screen frame, and put the screen holder, and draw it around (avoid being too tight), leave a centimeter along the mesh ring, put on the bolts and tighten, and finally cut off the excess screen.
Application of 450mm Vibrating Filter Sieve for Paint Coating:
450 type vibrating sifter can be widely used in food, ceramic, medicine, metallurgy, chemical industry, paint and other industries. Also it has a successful application in fast food restaurants and famous chain distribution center, such as pastry flour, bread flour screening in removing impurity, fruit and vegetable juice, soymilk filter etc.
Contact: Ms. Magie
E-mail: sale@aarealmachine.com
magiecn@gmail.com
WhatsApp/WeChat: 0086-15637361027
Website: https://www.aarealmachine.com
Product Tags:
|
|
Noiseless High-Performance 450mm Vibrating Filter Sieve for Paint Coating Images
|
